uniform moieture conetent-manufacture,factory,supplier from China

The 4 deckveneer dryer purchased by our customers in Guizhou has now been produced and is being shipped to customers.Shine heat exchanger adopts step by step heat transfer,and the specifications of each section of the heat exchanger are different,and the hot air in the heat exchanger can be uniformly emitted to the veneer.The veneer after drying has uniform moisture content,flat,no buckle or end waviness;free of splits and the surface is in good condition for gluing.

Myanmar factory customer four layer veneer dryer and biomass burner matching use, The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing. and biomass burner can directly burn a variety of waste wood, greatly saving the drying cost.

The characteristics of the veneer dryer are more obvious, mainly in several aspects:1. the drying speed is fast, the drying quality is good, and the drying defects are few. When the wood veneer is heated at high frequency, the temperature is uniform, and if the drying process is well controlled, the veneer can be dried without internal cracks, surface cracks and end cracks, so that there will be no drying of the veneer losses in the process.2.

Guangdong customers buy is our 48 meters 2deck veneer dryer with 6 tons of biomass burner,output per hour 3-3.5 m3/h,if it is a good fuel can reach 3.5 m3/h,temperature can reach 200 degrees,drying effect is very good,Customer feedback is very satisfied with the equipment.For customers to reduce the cost of drying,drying out of the veneer moisture content uniform, smooth,no wrinkles or end corrugated,no cracks,surface bonding state is good.

The wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried board is easier to save. Let's take a look at how the dryer works.Before the wood veneer enters the dryer, it is processed and divided into boards of the same thickness. After entering the interior of the machine, it is heated and evaporated. The construction technology of high temperature and rapid drying is adopted. The treated boards are not prone to cracks and deformation problems.

Yesterday's annual meeting of the company was successfully held, which marked a perfect end to last year's work. In the New Year, we will make persistent efforts. During the holiday, we will receive orders normally, welcome to consult at any time.

Since its establishment in 1999, Shine Machinery has always adhered to the development concept of continuous innovation and provided excellent solutions for customers.At present, our largest roller veneer dryer has been installed and runs smoothly in South Africa, capable of drying approximately 230 cubic meters of veneer in 24 hours.Recently, our 6-layer and 6-meter wide veneer dryer has also unveiled its mysterious veil. Currently, research and development are progressing smoothly, with an expected hourly output of around 15-18 cubic meters, which will further enhance the user experience.

Recently, our Six-deck Roller Veneer Dryer carryed on a test run, and Peruvian customer visited the testing site. At present, the R&D work is progressing smoothly, and the new generation of automatic veneer loading machine meets expectations. The new dryer will undergo a fully automated upgrade to reduce labor costs while ensuring efficient and stable drying. It is expected to produce around 15-18 cubic meters per hour.

The 58-meter-4.5-meter-wide double-deck roller veneer dryer purchased by a customer in Xishuangbanna is heated by heat-conducting oil,with high output, and the moisture content of the dried veneer is uniform.The customer has now put it into use.Very satisfied,our equipment has been affirmed by many domestic and foreign customers,we must work harder to do better,and welcome customers to visit our factory at any time.

Happy International Goddess Day to all the women in the world !