Veneer Drying Quality-manufacture,factory,supplier from China

When purchasing a veneer dryer, you should pay attention to: a good quality dryer has reasonable design, stable operation, energy saving and environmental protection, which can effectively improve the production capacity and quality of the dryer, and at the same time reduce the production cost of the dryer and the wear of parts , Consumption, reduce equipment maintenance costs. From the perspective of the performance of the veneer dryer, a good-quality dryer has the advantages of reasonable structure, low energy consumption, long service life, and durability.There are many types of kiln wood.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

The characteristics of the veneer dryer are more obvious, mainly in several aspects:1. the drying speed is fast, the drying quality is good, and the drying defects are few. When the wood veneer is heated at high frequency, the temperature is uniform, and if the drying process is well controlled, the veneer can be dried without internal cracks, surface cracks and end cracks, so that there will be no drying of the veneer losses in the process.2.

The Vietnamese customer's 40-meter single-layer veneer drying equipment is being installed. Due to the impact of the epidemic, the engineer cannot go to the site to install it. We will guide the customer to complete the installation smoothly through the video, and thank the customer for their recognition of our products.

Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save.

Why lumber can produce stem shrink, crack, bend be out of shape, mildew to wait for a phenomenon, it is to contain a lot of moisture as a result of lumber, go into the water branch in specific environment evaporates continuously, the quality that the nature of moisture evaporates can endanger lumber product seriously, appear a variety of problems.Therefore, wood needs to be forcibly dryer treated before it is made into various wood products.

Recently, our customers in Guangdong came to our factory for a visit and inspection. It was our business who accompanied the customers and gave a detailed explanation of our veneer dryer and customers. After seeing the customers, they recognized our equipment, especially It is our biomass burner. We also answer some questions raised by customers one by one, and now we are making solutions for customers according to their needs. We welcome customers to visit our factory.

The veneer dryer needs to pay attention to some problems when drying wood. Before use, the heating fan should be started first, and when the drying temperature is reached, the speed regulating motor should be started. The veneer should enter from the feeding port longitudinally, the feeding should be straight, the veneer and the transmission roller should be connected at a 90-degree angle, and the veneer should be cut neatly before drying.

The veneer dryer is mainly used for drying veneer and is the main machine for producing plywood. Due to the high internal moisture content of the newly peeled veneer, the purpose of the equipment is to reduce the moisture content of the veneer to meet the requirements while reducing material loss. The equipment has the characteristics of high thermal efficiency and small heat loss, which can effectively improve work efficiency and plywood product quality. However, there are a few things to keep in mind when using the device.Precautions for the use of veneer dryer1.